MacDon M200 Manual del operador descargar pdf (Pagina 75)

WINDROWER OPERATION

Form 169017 / 169087 / 169095 73 Revision C

6.3.8.2.2 From Transport Mode To Field

Operation

DANGER

Stop engine and remove key from ignition

before leaving operator's seat for any reason.

A child or even a pet could engage an idling

machine.

a. Shut down engine and remove key from ignition.

b. Disconnect electrical harness from windrower and

store harness (A) on weight box.

c. Disconnect wiring connector (B) at front wheel.

d. Remove clevis pin (C).

e. Push latch (D) and lift tow-bar (E) from hook.

Release latch and replace clevis pin.

f. Unhook tow-bar from weight box.

g. Start engine and lower lift arms until rear of lift

arms floats up and away from the lift arm

mechanism.

h. Stop engine and remove key from ignition.

i. Remove temporary lift pins (F) from weight box

and install pins (F) into holes at rear of lift arms.

j. Start engine and fully raise lift arms. Stop engine

and remove key from ignition.

k. Engage lift cylinder stops.

(continued next page)

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 233 234

Sin comentarios

MacDon M200 Manual del operador Pagina 75