MacDon M200 Manual del operador Pagina 126
- Pagina / 234
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095 124 Revision C
7.6 LUBRICATING THE WINDROWER
WARNING
To avoid personal injury, before servicing
windrower or opening drive covers, follow
procedures in Section 7.1 PREPARATION
FOR SERVICING.
Recommended Lubricant
LUBRICANT SPEC DESCRIPTION USE
Grease
SAE
Multi-
Purpose
High Temp. Extreme
Pressure (EP2)
Performance With 1%
Max Molybdenum
Disulphide
(NLGI Grade 2)
Lithium Base
As Required
Unless
Otherwise
Specified
The greasing points are marked on the machine
by decals showing a grease gun and grease
interval in hours of operation. See illustration
below.
Log hours of operation and use the "Maintenance
Checklist" provided to keep a record of scheduled
maintenance. Refer to Section 7.14
MAINTENANCE SCHEDULE.
7.6.1 PROCEDURE
DANGER
Stop engine and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
a. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
b. Inject grease through fitting with grease gun until
grease overflows fitting, except where noted.
c. Leave excess grease on fitting to keep out dirt.
d. Replace any loose or broken fittings immediately.
e. If fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
7.6.2 LUBRICATION POINTS
Refer to the illustrations on the following page to
identify the various locations that require
lubrication.
- M150 & M200 1
- Self-Propelled Windrowe 1
- Proposition 65 Warning 2
- 1 INTRODUCTION 3
- TABLE OF CONTENTS 4
- 2 SAFETY 8
- 7 Revision C 9
- 8 Revision C 10
- Safety Sign Locations 10
- 9 Revision C 11
- 10 Revision C 12
- 12 Revision C 14
- 3 DEFINITIONS 15
- 4 SPECIFICATIONS 16
- SPECIFICATIONS 17
- 4.2 SPECIFICATIONS 17
- 5 OPERATOR’S STATION 19
- OPERATOR’S STATION 20
- 5.2 OPERATOR PRESENCE 20
- 5.3 SEAT ADJUSTMENTS 20
- 5.7 LIGHTS 22
- 5.8 WINDSHIELD WIPERS 25
- 5.9 REAR VIEW MIRRORS 25
- 5.10 CAB TEMPERATURE 25
- 5.11 INTERIOR LIGHTS 26
- 5.12 OPERATOR AMENITIES 27
- 5.13 RADIOS 28
- 5.14 HORN 28
- 5.15 ENGINE CONTROLS/GAUGES 29
- 5.16 WINDROWER CONTROLS 30
- 5.17 HEADER CONTROLS 31
- 5.18.3 OPERATING SCREENS 36
- 34 Revision C 36
- 35 Revision C 37
- AUGER HEADER 38
- 37 Revision C 39
- 38 Revision C 40
- ROTARY HEADER 41
- 40 Revision C 42
- DISPLAY WARNINGS AND ALARMS 44
- 43 Revision C 45
- 6 OPERATION 53
- WINDROWER OPERATION 54
- HEADER - GENERAL 79
- 6.4 HEADER OPERATION 79
- + to increase float, or 82
- HEADER OPERATION - D SERIES 91
- CAUTION 100
- HEADER OPERATION - A SERIES 104
- HEADER OPERATION - R SERIES 112
- SERVICING 118
- 7 MAINTENANCE AND 118
- MAINTENANCE AND SERVICING 119
- 7.4 ENGINE COMPARTMENT HOOD 123
- 7.5 MAINTENANCE PLATFORMS 124
- WARNING 126
- 7.7 OPERATOR’S STATION 128
- 136 Revision C 138
- 7.8.3 OIL LEVEL 138
- 138 Revision C 140
- 139 Revision C 141
- 7.8.5 AIR INTAKE SYSTEM 141
- 140 Revision C 142
- 141 Revision C 143
- 143 Revision C 145
- 144 Revision C 146
- 145 Revision C 147
- 147 Revision C 149
- 7.8.7 ENGINE COOLING SYSTEM 149
- 149 Revision C 151
- 151 Revision C 153
- 153 Revision C 155
- 7.8.10 BELTS 155
- 154 Revision C 156
- 7.8.11 ENGINE SPEED 156
- 156 Revision C 158
- 157 Revision C 159
- 7.9.4 AIR INTAKE SYSTEM 159
- 158 Revision C 160
- 159 Revision C 161
- VALVE REPLACEMENT 161
- 160 Revision C 162
- 162 Revision C 164
- 163 Revision C 165
- 164 Revision C 166
- 166 Revision C 168
- 7.9.7 ENGINE COOLING SYSTEM 168
- 169 Revision C 171
- 171 Revision C 173
- 173 Revision C 175
- 7.9.10 BELTS 175
- 174 Revision C 176
- 7.10 COOLING BOX 177
- 49.75 in 186
- (1263 mm) 186
- 7.13 WHEELS AND TIRES 203
- INTERVAL SERVICE 211
- 8 TROUBLESHOOTING 214
- TROUBLESHOOTING 215
- 8.2 ELECTRICAL 217
- 8.3 HYDRAULICS 217
- 8.4 HEADER DRIVE 218
- 8.5 TRACTION DRIVE 218
- 8.7 CAB AIR 220
- 8.8 OPERATOR’S STATION 222
- 9 OPTIONS / ATTACHMENTS 223
- 222 Model Year - 2010 224
- 223 Revision C 225
- 224 Model Year - 2010 226
- 225 Revision C 227
- 226 Revision C 228
- 227 Revision C 229
- 228 Revision C 230
- 229 Revision C 231
- 230 Revision C 232
- 231 Revision C 233
- 232 Revision C 234
Relacionado con productos y manuales para Tractor MacDon M200
Tractor MacDon 9352 Especificaciones
(115 paginas)
(115 paginas)
Tractor MacDon M200 Manual del operador
(55 paginas)
(55 paginas)
Tractor MacDon M200 Manual del operador
(41 paginas)
(41 paginas)
Tractor MacDon M200 Manual de usuario
(1 paginas)
(1 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales