MacDon M200 Manual del operador Pagina 207
- Pagina / 234
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095 205 Revision C
7.13.2.2 Ballast Requirements
Fluid ballasting of rear caster tires is
recommended to provide adequate machine
stability when using large headers on the
windrower.
Also, the stability of machine varies with different
attachments, windrower options, terrain and
Operator’s driving technique.
Ballast capability per tire is at a maximum fill of
75%, or when fluid is level with valve stem when
the stem is positioned at 12 o’clock.
Fluid can be added to any level up to maximum
fill, and always add an equal amount of fluid on
both sides.
TIRE SIZE
FLUID PER
TIRE
AT 75% FILL
U.S. Gal. (Liters)
TOTAL WEIGHT
OF BOTH
TIRES
lb (kg) *
7.5X16
(A)
10 (38) 200 (91)
10X16
(B)
18 (69) 380 (170)
16.5X16.1
(C)
41 (158) 830 (377)
* Weights are given for typical calcium chloride
and water mixtures. Weight is reduced by 20% if
only water is used (for areas that do not require
antifreeze protection).
HEADER DESCRIPTION
RECOMMENDED BALLAST
RECOMMENDED
TIRE SIZE
APPLICABLE
WINDROWER
LEVEL GROUND HILLS
TYPE SIZE
PER
TIRE BOTH TIRES PER TIRE BOTH TIRES
U.S. Gal.
(Liters)
lb (kg) *
U.S. Gal.
(Liters)
lb (kg) *
A, D, R Series
All Options
25’ and Down 0 0 0 0 A,B,C M150, M200
D Series
30’ Single Or
Split Reel W/O
Conditioner.
35’ Single Reel
0 0 10 (38) 200 (91) A,B,C M150, M200
30’ Split Reel.
Steel Fingers &
Conditioner.
35’ Split Reel (5
Or 6 Bat)
18 (69) 380 (170) 30 (115) 630 (288)
Level Ground -
B, C
Hills - C
M150, M200
40’ 30 (115) 630 (288) 41 (158) 830 (377) C M150, M200
* If only water is used, increase volume of water by 20% (up to maximum allowable fill per tire) to compensate.
- M150 & M200 1
- Self-Propelled Windrowe 1
- Proposition 65 Warning 2
- 1 INTRODUCTION 3
- TABLE OF CONTENTS 4
- 2 SAFETY 8
- 7 Revision C 9
- 8 Revision C 10
- Safety Sign Locations 10
- 9 Revision C 11
- 10 Revision C 12
- 12 Revision C 14
- 3 DEFINITIONS 15
- 4 SPECIFICATIONS 16
- SPECIFICATIONS 17
- 4.2 SPECIFICATIONS 17
- 5 OPERATOR’S STATION 19
- OPERATOR’S STATION 20
- 5.2 OPERATOR PRESENCE 20
- 5.3 SEAT ADJUSTMENTS 20
- 5.7 LIGHTS 22
- 5.8 WINDSHIELD WIPERS 25
- 5.9 REAR VIEW MIRRORS 25
- 5.10 CAB TEMPERATURE 25
- 5.11 INTERIOR LIGHTS 26
- 5.12 OPERATOR AMENITIES 27
- 5.13 RADIOS 28
- 5.14 HORN 28
- 5.15 ENGINE CONTROLS/GAUGES 29
- 5.16 WINDROWER CONTROLS 30
- 5.17 HEADER CONTROLS 31
- 5.18.3 OPERATING SCREENS 36
- 34 Revision C 36
- 35 Revision C 37
- AUGER HEADER 38
- 37 Revision C 39
- 38 Revision C 40
- ROTARY HEADER 41
- 40 Revision C 42
- DISPLAY WARNINGS AND ALARMS 44
- 43 Revision C 45
- 6 OPERATION 53
- WINDROWER OPERATION 54
- HEADER - GENERAL 79
- 6.4 HEADER OPERATION 79
- + to increase float, or 82
- HEADER OPERATION - D SERIES 91
- CAUTION 100
- HEADER OPERATION - A SERIES 104
- HEADER OPERATION - R SERIES 112
- SERVICING 118
- 7 MAINTENANCE AND 118
- MAINTENANCE AND SERVICING 119
- 7.4 ENGINE COMPARTMENT HOOD 123
- 7.5 MAINTENANCE PLATFORMS 124
- WARNING 126
- 7.7 OPERATOR’S STATION 128
- 136 Revision C 138
- 7.8.3 OIL LEVEL 138
- 138 Revision C 140
- 139 Revision C 141
- 7.8.5 AIR INTAKE SYSTEM 141
- 140 Revision C 142
- 141 Revision C 143
- 143 Revision C 145
- 144 Revision C 146
- 145 Revision C 147
- 147 Revision C 149
- 7.8.7 ENGINE COOLING SYSTEM 149
- 149 Revision C 151
- 151 Revision C 153
- 153 Revision C 155
- 7.8.10 BELTS 155
- 154 Revision C 156
- 7.8.11 ENGINE SPEED 156
- 156 Revision C 158
- 157 Revision C 159
- 7.9.4 AIR INTAKE SYSTEM 159
- 158 Revision C 160
- 159 Revision C 161
- VALVE REPLACEMENT 161
- 160 Revision C 162
- 162 Revision C 164
- 163 Revision C 165
- 164 Revision C 166
- 166 Revision C 168
- 7.9.7 ENGINE COOLING SYSTEM 168
- 169 Revision C 171
- 171 Revision C 173
- 173 Revision C 175
- 7.9.10 BELTS 175
- 174 Revision C 176
- 7.10 COOLING BOX 177
- 49.75 in 186
- (1263 mm) 186
- 7.13 WHEELS AND TIRES 203
- INTERVAL SERVICE 211
- 8 TROUBLESHOOTING 214
- TROUBLESHOOTING 215
- 8.2 ELECTRICAL 217
- 8.3 HYDRAULICS 217
- 8.4 HEADER DRIVE 218
- 8.5 TRACTION DRIVE 218
- 8.7 CAB AIR 220
- 8.8 OPERATOR’S STATION 222
- 9 OPTIONS / ATTACHMENTS 223
- 222 Model Year - 2010 224
- 223 Revision C 225
- 224 Model Year - 2010 226
- 225 Revision C 227
- 226 Revision C 228
- 227 Revision C 229
- 228 Revision C 230
- 229 Revision C 231
- 230 Revision C 232
- 231 Revision C 233
- 232 Revision C 234
Relacionado con productos y manuales para Tractor MacDon M200
Tractor MacDon 9352 Especificaciones
(115 paginas)
(115 paginas)
Tractor MacDon M200 Manual del operador
(55 paginas)
(55 paginas)
Tractor MacDon M200 Manual del operador
(41 paginas)
(41 paginas)
Tractor MacDon M200 Manual de usuario
(1 paginas)
(1 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales