MacDon M200 Manual del operador descargar pdf (Pagina 178)

MAINTENANCE AND SERVICING

Form 169017 / 169087 / 169095 176 Revision C

i. If necessary, adjust clearance as follows:

1. Loosen nut (B) on motor support (C).

2. Move support in or out until rotor is 0.08 - 0.24

in. (2 - 6 mm) from screen near the center.

3. Re-tighten nut (B).

4. Loosen the two motor mount bolts (H).

5. Move motor / rotor assembly (J) to obtain 0.04

- 0.32 in. (1 - 8 mm) gap between rotor to

screen at full rotation of the rotor.

6. Re-tighten bolts (H) on motor mount.

j. Close screen access door (E) and engage latch

(D).

k. Lower engine compartment hood.

0.08 - 0.24 in.

(

2 - 6 mm

)

0.04 - 0.32 in.

(

1 - 8 mm

)

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 233 234

Sin comentarios

MacDon M200 Manual del operador Pagina 178